You are here:  Home arrow Products arrow Auxiliary Lighting arrow Ezy-Mount PIAA R-GS Light Bar Kit
Default screen resolution Wide screen resolution
Auxiliary Lighting arrow Ezy-Mount PIAA R-GS Light Bar Kit



View More Images (5)
View More Images (5)

Ezy-Mount PIAA R-GS Light Bar Kit


Price per Unit (piece): $169.95

The new Ezy-Mount light bar kit will mount to R1100GS, R1150GS/GSA & R1200GS/GSA right out of the box.

The new bar will mount any out of 11 possible PIAA or other lights to pre-drilled mounting holes, or a single 10mm hole to accommodate the PIAA PowerSports lights.

It will also work with many other brands of lights that utilize single bolt mounts.

Precision Crafted

The Ezy-Mount® precision crafted 'one-piece' CNC, T-6 Aluminum multi-fit/light bar kit will mount the following lights. 

  • PIAA 500-Series and 900-Series
  • PIAA P1000 and P9000
  • PIAA 1100X and 2100XT
  • PIAA HP2100 HID
  • PIAA 600 & 610 HID lamps
  • Several Hella Optilux lights that have the same light base as the Hella 1500 series lamps
  • Other lamps may fit depending on the mounting bracket but may require enlarging the holes

You can mount top, bottom, or both. R1200 GS Adventure owners should note that a bracket adapter kit is available that allows relocation of the factory auxiliary lights to my bar, allowing you to add a second set of lights.

All kits are clear anodized first, and then have a black powder-coat applied over base clear coat. Clear helps protect all threaded areas of kit from corrosion over time.

A durable Poly-blend, UV Resistant powder is used for this bar, as I did on the original round bar kit produced for PIAA PowerSports.

Use of the PIAA 600 Series and PIAA HP2100 HID lamps requires installation of a special HID Ballast mounting bracket, purchased separately. 

Also available separately is our switched power 'Plug 'n Play'  wiring interface kit that allows connection to the parking lamp switched power circuit - without the need to splice into the factory wiring harness.

This kit also allows power to flow only in one direction, never allowing power to flow back to the bike’s sensitive CAN BUS system.

Note: Ezy-Mount® Bar kit does not include PIAA® lights.

* This kit will not fit the new 2008 R1200GS model but will fit the 2008 R1200GS Adventure.

Caution: Due to several reported clearance discrepancies, before ordering for your GSA model, you should measure clearance between top of Crash Guard Bar and bottom of Oil Cooler Assembly.

You must have 7/16 inch of clearance to mount my bar hanger clamps. Oil Coolers are mounted in flexible rubber and the unit clearance to crash guard bar is not consistent.

GSA Bar Clearance Example.

GSA Bar Necessary Clearance Example

  
   


Availability

In Stock: 1

Usually ships in:

24h.gif
:

 

Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.





Last Updated: