menu cart
Dual Sport Pivoting Risers for 7/8" (22mm) Bars - Buell Incl.
Dual Sport Pivoting Risers for 7/8' (22mm) Bars - Buell Incl.

Dual Sport Pivoting Risers for 7/8" (22mm) Bars - Buell Incl.

Price: $119.95
Out of Stock
Part Number:ROX_P2SSM
help
*We'll ask for shipping info at checkout
Fits fit in any application with 7/8" bars. KLR 650, XR 650L, V-Strom, BMW 1150 &1100, Triumph, Buell, etc. etc..

The combination of off-road and on-road riding skills demand that your handlebars are at the proper level and position. Rox Risers are the premier handlebar riser for Adventure Motorcycling, on road and off. Its pivot puts your bars at your preferred position relieving wrist, elbow and shoulder stress. As you relieve these stresses, and increase control of your motocycle you can spend longer times on you bike and enjoy the time more.

Rox Risers are ...

  • Adjustable
    Dual rotation points makes Rox Riser selectively adjustable forward and back, allowing you to fit your handlebars to your preferred riding position. Rox Risers allow you to raise your stock bars or use a motocross style bar.
  • Universal
    With its two piece design, Rox Riser will install on virtually any Mini/Off Road Bike that has clamps to hold the handlebars, making it incredibly universal.
  • Engineered and tested for maxinum strength and durability.
  • CNC machined from billet 6061 T6 aluminum and anodized gun metal grey.
  • In order to properly clamp into the Buell's triangular handlebar clamps the 7/8" diameter post was lengthened as well as the offset of the top clamps to clamp over the knurling on the original handlebar. Other changes were made to this riser to make it easier to reach your original handlebar clamp bolts and cosmetic changes were made just for those of you that appreciate the finer things in life. Machined from 6061 T6 aluminum, anodized gun metal grey.
  • Patent # US 6,920,806 BZ

Notes:

  • Caution: First determine if you have adequate cable length before installing handlebar risers
  • Amount of extra cable length varies based on make and model
  • It is recommended that you consult your local dealer
  • Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.
  • Caution: Neither Cyclenutz.com or Rox Speed FX are responsible for injury or death resulting from installation of this product. Thoroughly read and follow instructions.

Related Items

Recently Viewed Items